Caprock
Versatility, Toughness, and Strength
The Caprock is designed for maximum rigidity with today’s larger optics. It features integral Picatinny style scope bases with 20 MOA forward cant machined into the forward and rear bridge, for rock solid scope mounting using a variety of rings. The center section is cut out over the ejection port, to allow easy loading from the top and unhindered case ejection. It is available in left or right hand configuration, and can be had in either stainless steel or titanium body(Caprock-TI).
PRICE: $1350 stainless, add $450 for Titanium Body. Add $200 for Caprock .338 action for Norma/Lapua/Rigby cartrides
- Switchlug-IL compatible
- One piece bolt with removable handle
- M16 style extractor system
- Tuned firing pin assembly with .060″ pin diameter
- Integral Recoil lug
- Helical Fluted Bolt Body
- Nitride finished bolt standard
- A/W mag cut standard on Stainless Short action
- DBM or BDL style bottom metal available on Medium length, 3.200″ max cartridge OAL
- Bolt faces available for .223, .308, Magnum, and Norma/Lapua cartridges
Claymore
Accuracy, Reliability, Economy
The Claymore action is our original foundation for a WTO custom build, and is standard on the Black Gap and Compact series. Claymore is a full round, Remington 700 footprint action with design features that set it above the rest. Available left and right hand, short and long, stainless steel or titanium(Claymore-Ti).
PRICE: $995 stainless steel, $1450 Titanium
- Switchlug-IL compatible
- One piece bolt with removable handle
- M16 style extractor system
- Tuned firing pin assembly with .060″ pin diameter
- Integral Recoil lug
- Helical Fluted Bolt Body
- Nitride finished bolt standard
- 8-40TPI scope base screws, .860″ hole spacing
- Pre-drilled for scope base recoil pins between base screw holes
- 1.062″x16TPI thread tenon
- Compatible with Wyatt’s extended magazine boxes
- Side mount bolt release